$+1 $+&'6 5+/2.
B IO B ID E T B B C-70 WARNING Do Not over-tighten plumbing connections. Over-tightening plumbing connections can damage parts and cause leak.
B IO B ID E T B B C-70 CONTENTS Functions and Characteristics ............................. 4 Parts list .................................................................. 5 Configuration .......................................................... 6 Final Assembly ....................................................... 7 Installation Instruction ..................................... 8 Maintenance ....................................................... 10 Warranty ..........................................
B IO B ID E T B B C-70 Functions and Characteristics $+1 $+&'6 5+/2.'6 $$% Ambient Temperature bidet model Adjustable Pressure Control Ingenious splash guard Quality Silver Brass Part Continuous Controlled Water Stream Universal T valve Removable nozzle for better hygiene No electricity or battery required Splash Guarded Nozzle Connects directly to fresh water line P.S.P.
B IO B ID E T B B C-70 Parts List $+1 $+&'6 5+/2.
B IO B ID E T B B C-70 Configuration $+1 $+&'6 5+/2.
B IO B ID E T B B C-70 Tighten nuts while checking for leaks. Do Not over tight.
B IO B ID E T B B C-70 Installation Instructions 1. CAUTION Do Not over tight any connections. Over tightening connections and adaptor can cause damage to the parts. 2. PROCEDURES OF ASSEMBLY 31 Shut water supply by turning it to the right and disassemble the water hose. Flush toilet to drain water inside of toilet water tank before disassembling the water hose.
B IO B ID E T B B C-70 Remove existing seat and lid. Release the bolts on both side of the existing toilet seat. 2 3 Connect supplied T valve to the toilet fill valve. Note T valve will be connected directly to toilet fill valve, not the shut off valve. Then connect rest of water lines to connected T valve. 4 3 Mount bidet and toilet seat/lid over toilet mounting holes. Supplied rubber O-rings should be placed under the bidet mounting bracket to protect and secure bidet on the toilet.
B IO B ID E T B B C-70 Maintenance To clean the nozzle, gently pull down on the head of the nozzle, and use a toothbrush of soft cloth and mild detergent to clean the nozzle. You may also remove entire nozzle assembly and soak it in mild detergent. Do not use any harsh, abrasive products to clean Simplet BBC-70, which may damage surface of the product.
B IO B ID E T B B C-70 Warranty Your Bio-Bidet, Is warranted against defects in materials or workmanship for one (1) year from the Date of original purchase .Defective parts or a defective product returned to Bio Bidet will be repaired with new or comparable rebuilt parts or exchanged for a Refurbished Bio-Bidet as determined by Bio Bidet in their sole discretion This limited warranty given by Bio Bidet covers all defects encountered in normal use of Bio-Bidet, and do not apply in the following cases: 1.
B IO B ID E T B B C-70 5. Any and all damages to plumbing, walls, floors, ceiling and personal properties resulting from water leaks or breakage. The product must be used at the user’s own risk. Therefore, the owner hereby releases the manufacturer and distributor from any and all claims for damages where the above condition exists.
B IO B ID E T B B C-70 Thankyou Technical support / Customer Service Bio Bidet 205 Berg ST Algonquin, IL 60102 T : 847.458.2334 U.S TOLL FREE : 877.339.5214 support@biobidet.com www.biobidet.
