BB3000.09 2013.3.26 3:7 PM 페이지1 mac001 JETPDF 2540DPI 175LPI •This unit is specially manufactured for household use. •Please read all operating instructions before installation. Notes : 1. This product should be installed according to this manual’ s directions. 2. Please keep this manual for future reference. 3. Please register the attached Warranty upon purchase of bidet. 4. Observe all precautions as noted on this manual.
BB3000.09 2013.3.
BB3000.09 2013.3.26 3:7 PM 페이지3 mac001 JETPDF 2540DPI 175LPI Properly installed and maintained, your new bidet should provide years of optimal operations. Read this manual before installation.
BB3000.09 2013.3.26 3:7 PM 페이지4 mac001 JETPDF 2540DPI 175LPI IMPORTANT INFORMATION The following terms are used to indicate varying levels of precautions: WARNING indicates a potentially hazardous situation which, if not avoided, may result in serious injury CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or damage to the product or other property.
BB3000.09 2013.3.26 3:7 PM 페이지5 mac001 JETPDF 2540DPI 175LPI IMPORTANT INFORMATION WARNING Keep out of the direct sunlight and flammable objects. Do not disassemble the unit. It will expire remaining warranty. Low-temperature burn Usually, a burn or a scald is caused as a result of the skin coming in contact with something very hot such as fire, boiling water, hot oil, etc.
BB3000.09 2013.3.26 3:7 PM 페이지6 mac001 JETPDF 2540DPI 175LPI IMPORTANT INFORMATION CAUTION ☞ a detergent a benzene ☞ a insecticide ☞ ☞ alcohol 6 Do not use chemicals. Use only damp cloth or neutral detergent to clean. Take all possible safety precautions when phsically challenged person, elderly, or child is using the unit. Do not slam or apply excessive force on the unit. Do not step on the unit.
BB3000.09 2013.3.26 3:7 PM 페이지7 mac001 JETPDF 2540DPI 175LPI IMPORTANT INFORMATION CAUTION Do not push or pull connection tube. Do not splash water or waste water directly to the unit. ** Water Temperature ** The human skin may be scalded when high-temperature water comes into contact with it. Close supervision is necessary when the user is unstable or a child.
BB3000.09 2013.3.
BB3000.09 2013.3.26 3:7 PM 페이지9 mac001 JETPDF 2540DPI 175LPI IDENTIFICATION 3/8”T-Valve (2 pc) Water Supply tubing (4m) Mounting Bolts Bolt Guides Simply Guide Fill valve water supply hose Cone Packings Nuts Manual GENERAL PRECAUTIONS 1. Water supply should have a water pressure between 2.0 - 7.5kgf/㎠ (28.4psi~ 106.7psi.) 2. Only connect to clean water pipe. 3. Take the protective measures to prevent from freezing. 4. Do not expose to direct sunlight, as it may discolor the plastic. 5.
BB3000.09 2013.3.26 3:7 PM 페이지10 mac001 JETPDF 2540DPI 175LPI OPERATION ♣Posterior Washing & Enema function. -Simply sit on the unit, and select posterior/ enema funtion by pulling the lever backward gradually. Stop Posterior wash ♣Water Pressure Adjustment & Enema Function. on putting into on pushing out 10 -The water pressure can be manually adjusted to 5 levels. -To activate the enema function, slowly increase the water pressure by adjusting the level till the washing water enters the rectum.
BB3000.09 2013.3.26 3:7 PM 페이지11 mac001 JETPDF 2540DPI 175LPI OPERATION ♣Feminine Washing. -For the feminine wash, slowly push the lever forward (away from you). Stop Feminine wash Cold H o t ♣Warm water adjustment (when applicable). -Water temperature is adjustable to desired temperature as illustrated. ♣Nozzle cleaning function -Simply push self-cleaning button before and after using the unit for maximum hygiene.
BB3000.09 2013.3.26 3:7 PM 페이지12 mac001 JETPDF 2540DPI 175LPI INSTALLATION 1 Removing the existing seat and lid. -Remove existing seat and lid 2 12 Close water supply shut off valve.
BB3000.09 2013.3.26 3:7 PM 페이지13 mac001 JETPDF 2540DPI 175LPI INSTALLATION 3 Connecting the T-Valve (Cold Water / Hot Water) 1. Flush out remaining water in water tank 2. Removing existing fill valve water supply hose. 3. Install supplied T-valve. 4. Connect“Cold”/“Hot”water suppy tube. 5. Connect supplied fill valve water supply hose. (7/8”× 3/8”) Packing Rubber (Black) Tip: Do not over tighten supplied parts when installing.
BB3000.09 2013.3.26 3:8 PM 페이지14 mac001 JETPDF 2540DPI 175LPI INSTALLATION 4 Installing . 1. Place mounting bolts into mounting brackets and slide into the mounting bracket guide rail on the bottom of the main unit. 2. Securely fasten cone packing from bottom to secure the unit to toilet. 5 Connect both hot and cold water supply tube to water inlet on bidet seat.
BB3000.09 2013.3.26 3:8 PM 페이지15 mac001 JETPDF 2540DPI 175LPI MAINTAINANCE Cleaning the nozzle - Pull out the nozzle and clean the nozzle with toothbrush. - After cleaning the nozzle, push the nozzle-cleaning button on the operation lever to activate the self-cleaning function.
BB3000.09 2013.3.26 3:8 PM 페이지16 mac001 JETPDF 2540DPI 175LPI TROUBLE SHOOTING ♣Before calling the service (A/S) center, please perform the following checks. Problem Remedy Remarks The washing water is not spraying properly 1.Check water supply valve. 2.Clean the nozzle. There is no hot water pipe below the wash basin Connect from another hot water supplying source. Water leaking or dripping Check the connection and securely fasten if loose.
BB3000.09 2013.3.26 3:8 PM 페이지17 mac001 JETPDF 2540DPI 175LPI WARRANTY BBC Innovation Corporation Limited Warranty This limited warranty gives you specific legal rights, and you may also have other rights that may very from state to state or according to other conditions.
BB3000.09 2013.3.26 3:8 PM 페이지18 mac001 JETPDF 2540DPI 175LPI WARRANTY REGISTRATION 1 Year Warranty Ⓡ The Manufacturer carefully tests every Bio Bidet before shipment. Bio BidetⓇ made with highest quality materials in the highest standard of production and workmanship and guaranteed to be free of defects. The warranty is good for one year from purchase date. Only the original purchaser may submit a claim under this limited warranty.
BB3000.09 2013.3.
