Use and Care Guide

INSTALLING THE S400 (cont.)

9.Place the toilet seat back on the toilet over the

bidet and secure the bolts down so that the seat

and bidet attachment are stable.

10.Connect the hose from step 6 to the bidet

water connection underneath the handle

of the bidet.

11.Slowly turn the water supply valve back on

and check for leaks and test the unit for

functionality.

Note:

If any leaks occur, check all rubber washers and make sure all

connections are tight and secure.

12. If there are no immediate leaks, check again

in about 5-10 minutes and your bidet is ready

for use!

Step 9

Step 11

Step 10