Use and Care Guide

PEARL
Notice:
This device is designed for connection to a cold water source with a
pressure of 20-80 psi.
2.Disconnect the supply line from the toilet
fill valve.Attach 7/8” T-Valve Shutoff to the
threaded fill valve on your toilet. Be sure
the 7/8” Flat Washer is in the T-Valve before
installing.Position the T-Valve so that the
shutoff handle is facing the front of the toilet.
3.Reattach your existing toilet supply line
to the bottom of the T-Valve. Be sure all
connections are secure, and no leaking
or water is present.
step 2
step 3
step 4
4.Remove protective plastic covers on
threaded caps from ends of 48” Stainless
Steel Supply Hose.Attach the hex-head
end of the hose to the T-Valve.
5