Installation Manual

8. Troubleshooting
Problem Possible cause Corrective Action
Toilet does not
shut off
Toilet leaks
Does not flush
Adjust pushrod length as required
Shut off water supply, disconnect
supply line and inspect all washers.
Siphon cover unseat
Flush valve seat and/or
flapper worn or deformed
Pushrods too long,
holding the flush valve open
Loose bowl/floor connection
Water supply hose is not
properly connected
Pushrods do not contact
flush valve
Supply line blocked
Water supply valve closed Open valve and allow water to
fill tank.
Disconnect water supply hose
and reconnect.
Fix the siphon cover.
Shut off water supply.
Replace flush valve gasket.
Adjust pushrod length as needed.
Check bowl/floor connection.
Verify that bowl is properly tigh-
tened, Check Wax-Ring
- 7 -