bio bidet bbc-200 & 250 Installation Manual & operating Instructions ôª æíðóèåö·åëµ éùñæöé
B IO B ID E T B B C-20 0 | 250 WARNING Do Not over-tight plumbing connections. Over-tightening plumbing connections can damage parts and cause leak.
B IO B ID E T B B C-20 0 | 250 CONTENTS Functions and Characteristics ............................. 4 Parts list .................................................................. 5 Configuration .......................................................... 6 Final Assembly ....................................................... 7 Installation Instruction ..................................... 8 Maintenance ....................................................... 10 Warranty ..................................
B IO B ID E T B B C-20 0 | 250 Functions and Characteristics Ambient Temperature bidet model Adjustable Pressure Control Ingenious splash guard Quality silver brass parts Continuous Controlled Water Stream Brass T valve Removable nozzle for better hygiene No electricity or battery required Splash Guarded Nozzle Connects directly to fresh water line P.S.P.
B IO B ID E T B B C-20 0 | 250 Parts List Name Quantity 3/8” T Valve 2 Hot water tube 1 Cold water hose 1 Protective O rings 2 Owner’s Manual 1 5
B IO B ID E T B B C-20 0 | 250 Configuration 7.79" 6.79" 5.5" 2.62" 2.32" 8.07" 17.
B IO B ID E T B B C-20 0 | 250 Supplied Wing-Nuts MUST be used on all inlet connections 7
B IO B ID E T B B C-20 0 | 250 Installation Instruction 1. BEFORE INSTALLATION | CHECK POINTS x Check the size of the connection at your water supply valve. x 3/8” – proceed to step 2 x 1/2“ – Contact Bio Bidet for 1/2” conversion nut x Rigid pipe – Contact Bio Bidet for 7/8” T-valve Supplied T valve is 3/8”. Conversion nuts will be supplied at no charge on demand only. 2. PROCEDURES OF ASSEMBLY 31 Shut water supply by turning it to the right and disassemble the water hose.
B IO B ID E T B B C-20 0 | 250 2 Remove Existing seat and lid. Release the bolts on both side of the existing toilet seat. 3 Connect the water supply hose to the supplied T-Valve. If supplied T-valve does not fit to your existing shut off valve, contact the manufacturer for conversion nut. 4 3 Mount bidet and toilet seat/lid over toilet mounting holes. Supplied rubber O-rings should be placed under the bidet mounting bracket to protect and secure bidet on the toilet. 5 3 Connect water supply hose.
B IO B ID E T B B C-20 0 | 250 Maintenance To clean the nozzle, gently pull down on the head of the nozzle, and use a toothbrush of soft cloth and mild detergent to clean the nozzle. You may also remove entire nozzle assembly and soak it into mild detergent. Do not use any harsh, abrasive products to clean Simplet BBC-50, which may damage surface of the product.
B IO B ID E T B B C-20 0 | 250 Warranty Your Bio-Bidet, when delivered to you in a new condition in its original container, Is warranted against defects in materials or workmanship for one (1) year from the Date of original purchase .
B IO B ID E T B B C-20 0 | 250 5. Any and all damages to plumbing, walls, floors, ceiling and personal properties resulting water leaks or breakage. The product must be used at the user’s own risk. Therefore, the owner hereby releases the manufacturer and distributor from any and all claims for damages where the above condition exists.
B IO B ID E T B B C-20 0 | 250 Thankyou Technical support / Customer Server BBC Innovation Corp 205 Berg ST Algonquin, IL 60102 T : 847.458.2334 U.S Toll Free : 877.339.5214 support@biobidet.com www.biobidet.
