Owner Manual

22 23
OPERATION (CONT.)
• Saver On/ Off
• When pressing the energy
saver LED on the main unit
will turn on. (press button
again, the saver LED will
turn off)
• Energy saver mode
automatically maintains a
water and seat temperature
of 89.6F (32C).
• When using bidet in saver
mode, it is turned to
automatic saver.
• When you rise from the seat,
it goes into saver mode.
• Seat temperature is
maintained 32C.
In energy saver mode, the seat
heating temperature could
appear to be lower than the
actual temperature setting.
OTHER ENERGY
SAVING TIPS:
• Keep seat cover closed
when not in use to prevent
heat from being lost.
• Keep temperature
set to low.
• Unplug the power cord
if you do not plan to use
the unit for a long period
of time.
• If the “MASSAGE” function
selected when user is not
using wash functions, it
automatically operates wash
and dry function sequentially.
• Wash (30 Seconds) + Dryer
(1 minute) then
automatically stops.
• Press “Move” button while
seat is not occupied.
• Nozzle shower will initiate
to clean nozzle and tip for
about 20 seconds.
• Nozzle will automatically
retract once finished.
• Press “Stop”and
“Temperature” remote
buttons simultaneously
until night light is turned
on or off.
15. Auto Wash 16. Nozzle Shower
17. Night Light
18. Economy (Energy Save Mode)