PERSONAL HYGIENE APPLIANCE Lifestyle Upgrade Installation Manual and Operating Instructions BB-1700 & BB-2000 www.biobidet.com BBC Innovation Corporation Head office: 205 Berg St. Algonquin, IL 60102 U.S.A Tel: (847) 458-2334 Fax: (847) 854-1296 This product should be installed according to this manual. Please read this manual carefully and install properly. Please keep this manual for future reference. Please register warranty for proper service.
Lifestyle Upgrade Contents PREPARATION IMPORTANT SAFEGUARDS / 4 GENERAL CAUTIONS CARTON CONTENTS / IDENTIFICATION 8 OPERATION (BASIC) 12 OPERATION (DETAILS) 14 INSTALLATION 18 INSTALLATION 6 OPERATION CAUTIONS BEFORE INSTALLATION SEPARATION OF THE UNIT FROM 21 THE TOILET BOWL Intended for household use only.
1 IMPORTANT SAFEGUARDS / GENERAL CAUTIONS READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in damage to the product or other property.
1 IMPORTANT SAFEGUARDS / GENERAL CAUTIONS CAUTION Prohibited Do not stand or sit on the seat cover lid. It is not designed to support a user’s body weight. Prohibited Observe at all times Prohibited Do not obstruct or put anything into the dry air outlet. Do not apply excessive force to the shower nozzle. Prohibited Allow the seat and lid to close automatically. Do not force the lid closed. Do not strain or push the connected hose and tube connecter; it may cause water leakage.
3 Identification 1 MAIN UNIT BB-1700 3 BB-1700 Control Panel Turbo Wash Nozzle PREPARATION Posterior Wash Nozzle Caution Label Lid Feminine Wash Nozzle Operation LED Window Deodorizer Stop all operation. Control Panel for BB-1700 Dryer Vent Drain / Quick Release Drain button Digital Occupied Sensor Heated Seat 2 ACCESSORIES For plumbing T-Valve For product fixation L-Valve Nuts (2 pcs) Installation instructions Cone packing (2 pcs) Posterior wash. Feminine wash. Turbo wash.
3 Identification 1 MAIN UNIT 3 BB-2000 Remote Control BB-2000 Stop all operation. Posterior wash. Turbo Wash Nozzle Caution Label PREPARATION Feminine wash. Posterior Wash Nozzle Dry washed area. Lid VORTEX wash. When selected during wash function nozzle oscillates automatically for a wider wash. If move button is selected when user is not sitting on the seat, it operates nozzle shower function.
4 Operation (Basic) 3 OPERATION CAUTION CAUTION Please press the “off” or “low” button to reduce the seat temperature after using. Special precautions should be taken for children, those who cannot adjust the temperature, and those who have sensitive skin. 1 Check for any water leaks. SIT DOWN ON THE SEAT •When you sit down on the seat, the ORANGE LED lamp on the control panel will light up.
5 Operation (Details) WARM AIR DRYER DEODORIZER 1- Press “Dry”( , ), warm, dry air is gently directed to washed area for about 3 minutes. 2- You may adjust the warm air temperature by pressing High( ) and Low( ) buttons. ※This product memorizes the air temperature of prior use. Deodorizer ON/Off (initial setting is Off) - Press button for( , ) 3 seconds (press the button again for 3 seconds, the function is canceled.
5 Operation (Details) MASSAGE (Rhythm Wash) •When using the Posterior Wash or Feminine Wash functions, pressing the “MASSAGE” ( , ) button will provide a pulsation spray. •You may change the pressure of the spray by pressing the “High”( ) button or “Low”( ) buttons. •Push the “MASSAGE”( , ) button again and the pulsating action will stop automatically. OFF State Saver On/ Off - When pressing( , ON Flashing State State ) the energy saver LED on the main unit will turn on.
6 Installation CAUTION BEFORE INSTALLATION •Do not plug in before installation. •If you need an electric power system or extension, please consult a qualified electrician. 5 6 Installation Catch Plate. Place the plate and guides over each mounting hole. Insert the mounting bolts through the plate and mounting holes. Bolt and Nut Assembly. Slide cone packing and washers onto the bolts then fasten to securely mount bidet seat to toilet. Bolt Guide BACK Bolt Bolt STEPS 1 2 Turn Off Water.
6 9 Installation 7 Wireless remote mounting guide. (BB-2000) Separation Of Unit From The Toilet Bowl 1 Disconnect the power plug. 2 Close water supply shut-off valve. 3 Drain water from bidet seat using drainage as illustrated. 4 Remove bidet seat from toilet as illustrated. Install wireless remote with adhesive tape •Remove adhesive from back of bracket and place bracket where desired. Adhesive tape Wall Inserting batteries •Insert supplied batteries (1.5V AAA) and close battery cover.
8 Maintenance 9 Water Draining CLEANING THE NOZZLE DRAINING THE WARM WATER TANK IN THE UNIT If you do not intend to use this product for 14 days or longer, drain the water from this product’s warm water tank. •When the “Posterior Wash ( )” button is pressed / for 3 seconds without occupying the seat, the nozzle can be cleaned with a soft toothbrush. ( : in Simple Operation panel -Remote Model) •After cleaning the nozzle, push the “Stop ( )” / button once again, and the nozzle retracts itself.
10 Trouble Shooting Trouble 11 Specifications Cause Remedy 1. The water tank is not filled. 1. Wait about one minute. 2. The shut off valve is closed. 2. Press the desired washing button once again. The washing water does not spray 3. Freezing inside the main unit or the water supply pipe. Specification Power Rating 4. Heat the room (for about two hours). frozen will cause a malfunction. The unit is not operating 2.
12 Warranty 13 INFORMATION TO THE USER (For America) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
