Owner Manual A7

18 19
OPERATION
CAUTION
1. All functions will be operational when the seat is occupied
except Nozzle Cleaning.
2. Before operating, ensure that water tank is filled up completely.
STOP
• Press “Stop” to stop current operation.
• When a user stands up, all operations will stop automatically.
• Press “Stop” for 3 seconds to turn the main unit o.
CLEANSING
• Press “Cleansing” to clean your posterior.
The function will stop in 1 minute automatically.
• Press this button again to activate oscillation. The nozzle
moves back and forth automatically to widen cleansing area.
• Oscillation wash stops if this button is pressed again.
BIDET
• Press “Bidet” for feminine wash. The function will
stop in 1 minute automatically.
• Press this button again to activate oscillation. The nozzle
moves back and forth automatically to widen cleansing area.
• Oscillation wash stops if this button is pressed again.
DRY
• Press “Dry” Warm air will come out for 3 minutes.
• To alter the strength of drying, press the button again.
AUTO
• Press “Auto: during the operation of “Cleansing” or “Bidet”
• Cleansing wash, oscillating wash and oscillating with massage
will operate for each 20 seconds consecutively.
• If the bidet Auto is wanted, press “Bidet” and “Auto” consecutively.
MASSAGE
• Press “Massage” to activate rhythmical wash for a
massage eect when using “Cleansing” or “Bidet”.
• Press the button again to release this function.
USER SETTINGS
• Each button can save 2 settings. (Cleansing, Bidet)
• Press User 1 button with the seat sensor <ON>, and Cleansing or Bidet
consecutively. Then choose nozzle position and water pressure level
by pressing FR/BK and HI/LO buttons. Press User 1 again to save
the setting with a beep.
• The same applies to saving User 2 setting.
• Press User 1 or User 2 while using cleansing or bidet will
operate saved settings.