Specifications

66
Job Site Set-Up
Points must be set in a clock
-
wise direction in order for the
auto draw portion of Integrator to work.
Step 1: Set Wall Markers
(Left to Right)
Starting on the left most wall of the
countertop, begin placing wall
stickers in a clockwise manner. Do
not skip any stickers. Proceed all
the way to the end of the right most
wall.
Note: It is perfectly normal to go
from point 140 (end of sequence)
to point 71 (beginning of
sequence) in laying out wall
markers. For example, if you start
with the point 130 and get to point
140, proceed by making the next
mark in the sequence 71.
STEP 2: Set X-Y Points
Place your X1, X2, Y1, Y2 edge
markers
Note: Although the XY markers are
placed on the cabinet edges, they
will not be used to measure the
cabinet edges.