Specifications

Units – projects can be set for Inches or metric (mm)

measurement.

Inch – defines all notes, labels and dimensions to be

presented in inches.

Metric – Defines all notes, labels and dimensions to be

presented in mm

Labels – Lets the user determine the rounding value for

all labels in either fractions or decimals.

Dimensions – Lets the user determine the rounding

value for all dimensions in either fractions or decimals.

Options –information you want exported

Cab Flatness – Automatically creates a table of flatness

of the cabinets, using the “z” height of the finished edge

markers.

Linear Footage – Automatically calculates the linear

footage of the finished edge of the countertop and

creates and associated label.

Square Footage – Automatically calculates the square

footage of the countertops and crates an associated

label.

Output Layers – measurement points output to the DXF

layers specified in the “Layer Definitions” tab.

Export Point IDs – creates the output in the DXF file.

Splash – automatically draw backsplashes for each

wall, at the specified splash height, and the length of the

wall. Drawn as a rectangular polyline.

Reverse Directions – For Open Wall data to a Planit

ORD file or an ETemplate EDF file. Reverses the order

of the output of the walls in case they are reversed in the

software program trying to read them.

Colors – determines the color of the final CAD output,

for entities and notes.