Specifications

59
4
By clicking on the labels that identify the drawing
attributes, the drawing can be modified and changed.
You can change these items:
• Overhangs
• Wall Offsets
• Radii
• Splash settings
5
Once complete, select OK to create your .dxf. Select
cancel if you do not want to create a .dxf.
Selecting OK bypasses the need to select the Process
button.
Integrator BackPlot Settings Point
Definitions
Layer Definitions
1 Specify the input file, Browse to the Input file.
2
Choose 2D points
(3D points is currently not used)