Specifications

58
2D Closed Wall Example
If the lines involved in the perimeter drawing are not
correct check the point definitions tab to see if the
points are defined according to the instructions under
the Point Definition Tab.
If the default parameters of the drawing are incorrect,
such as radius, overhang, wall offset, etc; check the
setting tab.
Integrator /
Preview
BackPlot Settings Point Definitions Layer
Definitions
1
Preview allows you to view and modify a CAD .dxf
before exporting the file.
Note: Preview cannot be used for ORD or EDF files.
If export an ORD or EDF, or a preview of the dxf is not
desired, select Process button on main Integrator tab.
2 Select the Preview Button
Note: If no preview is desired, select Process instead
3
To zoom in or zoom out, select the zoom controls.