Specifications

57
2A Default Point Set Example
2B Countertop Example
If the lines involved in the perimeter drawing are not
correct check the point definitions tab to see if the
points are defined according to the instructions under
the Point Definition Tab.
If the default parameters of the drawing are incorrect,
such as radius, overhang, wall offset, etc; check the
setting tab.
2C Open Wall Example
If the lines involved in the perimeter drawing are not
correct check the point definitions tab to see if the
points are defined according to the instructions under
the Point Definition Tab.
If the default parameters of the drawing are incorrect,
such as radius, overhang, wall offset, etc; check the
setting tab.
Available output formats:
Standard DXF
Planit ORD Ver 2
ETemplate Design File (EDF)