Specifications

48
EXCEPTION HANDLING
The automatic processing may encounter exceptions. You are alerted when manual processing
may be required. Remember you always have that option.
This common issue can be corrected using existing processing techniques:
• Not enough points overlap between photos
Look at photos for additional marks that can be manually marked or add
additional photos that may provide more overlap. Mark, reference, and re-
process.
• Points are missed by the automatic marking
At times an Intelli-Mark will be mis-identified. This may cause a mis-reference of
the marks. This should be easily seen and fixed through the final process value
and the point table. The largest residual is the quickest method for finding the
errant target. Simply select the incorrect point, right click and select “un-reference
selected”. Please note: Objects in a room also have the possibility of being
interpreted as a target. If this happens, use the visual check of photos or the point
table to correct.
Intelli – Mark Numbering Scheme
Number
Use
1 – 24 Intelli – Marks provided on card stock for automatic referencing or extra marks
25 & 26 Intelli – Marks: First Scale Points
27 & 28 Intelli – Marks: Second Scale Points
29 & 30 Intelli – Marks: Third Scale Points
31 - 50 Set “A” Intelli – Mark Edge Markers
51 - 70 Set “B” Intelli – Mark Edge Markers
71 – 140
Intelli – Mark Wall Markers (Self Adhesive on Roll)
18 sets on a roll or 1260 total (Don’t duplicate numbers in same job)
141-161 Reserved for future use (These may be printed on card stock for extra marks)
1 - 161 Complete set of Intelli – Marks provided in .pdf file with system