Specifications

39
ETEMPLATE PHOTO USERS INTELLI-FAQs
ANGLE MAXIMUMS
Q: I’ve completed a project and the values are within the necessary limits, but when I view my
project with the 3D viewer, there are some points missing. I tried exporting the point set and
then imported or opened it in my CAD software to complete the template drawing. The same
points are not there that also were missing in my 3D view in ETPhoto. WHY?
A: AUDIT tab - ANGLE MAXIMUM (deg):
Bad set to 10
If you would like to have it show up in your exported
point set, you can go to the pull down menu OPTIONS |
PREFERENCES | AUDIT tab and change the setting for
the ANGLE MAXIMUM (deg): Bad from 10° to 5° to
enable ID points with angles between 5° and 10° to be
exported. This setting is made default for ETP2 because
minimum angles in a project should be at least 30° --
almost every project will have some angles under 30° but ones under 15° have a lower
confidence level of accuracy. The user must determine if the point(s) is necessary for template
creation; what needs to be done to create the template as accurate as possible. Does the Bad
Angle Maximum setting need to be dropped to allow all the points in a particular project to be
exported, or can a templ ate be created without those lower angle points included in
the set?
PROCESSING WITH A DIFFERENT CAMERA
Q: OOPS!!! I selected the wrong camera’s .cam file to process with! I thought the pictures were
taken with one camera but they were really taken with another -- Is there anything I can do to fix
it? How can I process with a different camera?