Specifications
26
ETemplate Photo Reminders
Remember:
To add a new photo – it must have at least 6+ points in common with 1 previously
oriented photo, and have 1+ point in common with 2 other previously oriented photos
Note: Press the Alt key or use Zoom Icons/keys to help visualize problems.
To Unreference unclear points right click on the particular point and click Unreference
Selected or Select and Delete unnecessary points, if not needed for template creation
OR
Select a coded target point, and right mouse click for menu, select Properties of Selected and
click UNCODE | Apply and the selected coded target on the specifically chosen photo will
become an uncoded mark with a 1000 series ID #
IMPORTANT
Every marker needed to create a template drawing must be referenced and processed on
at least 2, 3 are better, photos. Points not cross-referenced appear on only one photo and
therefore, have no actual 3D location and will not appear in the final Exported file.
Template Creation
IF using Cadkey: Click CK19 desktop icon
•
In Cadkey select File > Import > AutoCAD dxf. Browse to find the exported file in the JOB
folder and Open the imported file of points
N
OTE
:
I
F SET OF POINTS APPEAR
“
SKEWED
”
EXIT
C
ADKEY
.
O
PEN
ET
EMPLATE
P
HOTO
.
R
EORIENT POINT SET USING
R
OTATE AND
E
XPORT
M
ODEL
.
I
MPORT INTO
C
ADKEY AGAIN
.
•
Click M for countertop menu
IF not using Cadkey
Create the template drawing by importing or opening the DXF file in CAD/CAM application
ETemplate
ETemplateETemplate
ETemplate
First !!
First !!First !!
First !!