Specifications

17
Visually check for the correct orientation in the 3D viewer
∗ Scale/Rotate tool can be used to view green X/Y rotation markers
∗ Point Table Constraints column can be used to select Constraint
points to be viewed red
9. Click Project | Audit Statistics
Auditing is the process of reviewing project data that is important to
the generation of the 3D model. The information provided by the
Audit step can be instrumental in tracking down problems and in
predicting the success of the processing stage.
For the best project results, verify:
Audit Overview > Unused =0
Audit Photo > Points Per Photo: Min. = 15
Photo Coverage (%area): Min. = 30
Audit Points > Rays Per 3D Point: Min. = 2 (3 = Best)
Angle Intersection: Min. = 30
10. Click File | Export Model
to export an ETemplate Photo finished project Point Set
∗ Choose Export Type: 2D DXF (.dxf) Click OK
∗ Input new filename for the point set .dxf file, Click Save
∗ Close Export Summary dialog
Import this .dxf file into a CAD/CAM system to create template outline, adding any
additional sink cutouts, overhangs, centerlines, notes, designators, etc. then send for
Tool Path or plotting for fabrication.
SAVE
SAVE SAVE
SAVE FREQUENTLY
FREQUENTLY FREQUENTLY
FREQUENTLY
Notes:
 If two Marked Points are referenced to each other, but they do not mark the same physical feature
on the object, they will not generate a correct 3D point.
∗ To Unreference unclear points right click on a particular point and click Unreference Selected
∗ Select and Delete unnecessary points, if not needed for template creation
To UNCODE a marker, select a coded target point, and right mouse click for menu choice
Properties of Selected and click UNCODE | Apply and the selected coded target on the
specifically chosen photo will become an uncoded mark with a 1000 series ID #.