Specifications

14
4. Check that the constraints have been defined correctly
∗ Click Project | Constraints List
∗ Check a specific constraint by selecting it in the list and clicking Edit
to view its Object point IDs and specified distance
∗ Delete a constraint by selecting it in the list and clicking delete
∗ Define a new constraint by:
1. Click Constraint Definition Mode click one (1) point on the first
scale, hold Shift, click the other end point (two markers are
highlighted red)
2. Click Add New Constraint
3. Verify in Constrain Properties dialog;
type is 2 points to be a given distance apart
default Scale Value is 46
click OK
4. Click Process Click SAVE
Repeat Constraint Definition steps 1 – 4 for all scales placed in a project if they are not
automatically defined by being automatically marked, referenced and processed through
the Automated Coded Target Project Wizard.
***U SER MUST P ROCESS & SAVE EACH CONSTRAINT BEFORE DEFINING ANOTHER ***
∗ Click Cancel if no new constraints need to be defined