Specifications

13
∗ Redefine the X1/X2 or Y1/Y2 markers if needed by clicking on the
Rotate tab
∗ Click one (1) point for X1, hold Shift, click another point for X2
∗ Verify 2 similar markers on a straight edge, from left to right
Click Define
∗ Click one (1) point for Y1, hold Shift, click another point for Y2
∗ Verify 2 similar markers on a straight edge, from front to back
Click Define, Process and Save
N OTE : Do Not use wall markers for rotation points
X1 (left) and X2 (right) markers should be placed as far apart as possible on the same edge
X1 (front) and X2 (back) markers should be placed as far apart as possible on the same edge
Rotation
Definition
Examples