Specifications

12


 How To Use Referencing (Quick Reference Selected)
∗ Quickly cross reference any number of same item across photographs by
selecting the same marker on open photographs using Select Items Mode
and holding the SHIFT key down for multiple selection
• Click Quick Reference Selected
 If the Quick Reference Selected succeeds, the selected
items are all referenced together and are unselected
 If Quick Reference Selected fails, a warning message will
appear displaying reason for failure and the items will remain
selected
Note: You cannot Quick Reference Selected two items marked on the same photograph.
3. Check to make sure the X1X2/Y1Y2 rotation markers have been correctly
defined
∗ Click Project | Scale/Rotate
Verify that the X1/X2 designators have been placed left to right
and that the Y1/Y2 designators have been placed front to back, so as
to cross over the X axis in the (Cartesian coordinate system) positive
direction.
∗ Click Cancel, if correct OR