Operating instructions

The call di ver si on is swit ched off. The three points in the
bot tom right will start to blink al ter na te ly.
Call forwarding quit
MSN-1 ...
Call Waiting
Cannot be configured using the system telephone on the elmeg hybird.
The call wai ting is sig nal led acous ti cal ly by an at ten ti on to ne via the loud spea ker and vi su al ly in the dis play. You can
set up the call wai ting to ne vo lu me and can al so choo se whet her a call wai ting is sig nal led just once or several times.
The following settings for the call waiting are possible:
»no« No furt her calls are sig nal led eit her du ring an exi sting con nec ti on or when a con nec ti on is being set
up. The cal ler gets a Busy signal.
»yes« Call wai ting is pos si ble but only if the re is an ac ti ve con nec ti on on your te le pho ne wit hout any calls
waiting.
Whilst in the »set up« me nu press the »call wai ting« soft key and se lect bet ween »in ter nal« and »ex -
ter nal« .
S Press the soft key un der »no« or »yes« in or der to se lect
the de si red call wai ting set ting.
Call waiting enable?
no ok
Display contrast
The con trast of the dis play can be set in di vi du al ly.
Start as fol lows:
a
F S > S
Re pla ce re cei ver
set con trast
O Press the ar row keys to set the con trast.
Con firm your in put with O.
Display contrast {}
- ©©©©- +
F-2->-3
Display contrast Con fi gu ring and set ting the sys tem te le pho ne
51