Operating instructions

Safety notes

•Mind the storage and operation temperatures for the device listed in the technical specifica-

tions.

•Only connect the device when the permissible ambient operating temperature has been

reached.

•Please note that condensate may form on or in the device when it is transferred from a cold to

a warm location. Only remove the unit from the package when the permissible ambient operat-

ing temperature has been reached.

• You should not make calls or connect or disconnect any lines during thunderstorms.

• Only attach the connecting cords at the connections provided.

•Make sure phone cables are installed in a safe manner to prevent tripping.

• Avoid the following:

- Direct sunlight

- Heat sources (such as radiators)

- Nearby electronic devices (such as stereos, office equipment or microwave devices)

- Ingress of moisture or liquids

- Aggressive fluids or vapors

- Dusty environment

• Do not use the unit in excessively humid rooms or hazardous locations.

• Only open those sections of the device specified in the assembly / operating instructions.

•Do not touch plug connectors with pointed, metal, or moist objects.

• If you do not permanently mount the device or any accessories, be sure to place it/them on a

non-slip surface.

•When required, clean the unit with a slightly moistened cloth.

• Only use approved accessories.

• Only terminals with SELV and/or which comply with ETS 300047 may be connected to the

unit. This regulation is fulfilled when approved terminal devices are used as intended.