Operating instructions

27
Enter the new number and press OK to confirm.
Enter the desired name and press Save to confirm.
You can also store the functions for the * and # keys.
You can enter a break in dialing by holding the “0” key down. This is shown as a P in the display.
If you need a flash signal in a phone number, such as for triggering a performance feature, you can
enter it using the R key. The flash signal is shown as an R in the display.
You can make corrections when entering a number or name using Del .
Refer to the table in the appendix on page 72 for the characters available for inputting names.