Operating instructions

14
When the battery status reaches the lower limit, the battery icon begins flashing ( ) in the display and
a low battery acoustic signal is issued (if acoustic signals are activated). You then have about 10 minutes
talking time remaining.
Register handset
The handset provided with the unit has already been registered at the base station. You must first
register any other handset at the base station before use. You can use a maximum of five (5) hand-
sets at the base station.
Refer to page 57 for information on how to register your handsets.
Setting the date / time
On initial startup of your unit, dashes are shown in the display instead of the date and time (--.-- --:--).
Refer to page 63 for setting the date and time.
The time can be updated automatically on an incoming call when your unit is connected with an
elmeg/funkwerk PABX system (only when CLIP is activated, and depending on the model and soft-
ware version of the PABX system).