User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 4
1.1 TX20K Transmitter
 High signal-to-noise ratio for excellent resolution
 Low temperature coefficient for accuracy from -40 to 85°C
 Wide power supply input range from 6 to 20VDC
 Power Standby mode to extend battery life
 Two on-board shunt calibration values
 Status Indicator light to assist in troubleshooting
 Circuit fully encapsulated
 Two different transmit modes; Block, and Stream.
 Remotely configurable sample rate, signal bandwidth, baud rate,
RF channel, transmit power, and input signal range.
 Two on-board shunt calibration values.
 Status Indicator light to assist in troubleshooting.
 Circuit fully encapsulated.
1.2 RX20K Receiver
 Compact 30 x 63 x 125 mm (1.2" x 2.5" x 5") size.
 USB powered (PC or USB charger)
 Digital USB serial data and analog voltage output signals
 Stable 1.2KHz analog output frequency response
 Configurable RF channel settings
 Seven unique simulated transmitter inputs
 Configure from PC over USB connection
 Standalone operation without PC using analog output
 Four external status LEDs.
 Analog output configurable for 0-5V, 0-10V, ±3V, ±5V, ±10V.
 Configurable analog output offset, scale, and polarity.