User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 3
1 System Overview
The TorqueTrak 20K Torque Telemetry System utilizes proven digital RF
technology to transmit a single data signal (most typically from a strain
gage) a distance of 10 feet (3 meters) or more depending on the
environment. Up to 16 systems can operate simultaneously on
independent channels.
TX20K Transmitter:
The TorqueTrak 20K is a robust, precision strain measurement
instrument ideal for short-term data collection and diagnostic testing. It is
designed to withstand harsh field conditions with ease-of-use in mind. A
standard TorqueTrak 20K Torque Telemetry System includes the
following items:
 TX20K Transmitter
 RX20K Receiver
 Receiver Antenna Element
 Receiver Antenna Magnetic Base with 13-ft Cable
 6-ft USB 2.0 A-male to B-male Shielded Cable
 10-ft 4-Conductor Ribbon Cable
 BS900 Bridge Simulator
 Narrow Blade Screwdriver
 9V Battery Connectors (2)
 9V Lithium Battery
 1 Roll of 1” Fiberglass Reinforced Strapping Tape
 Butyl Rubber Sheet
 Teflon Film kit
 Printable TT20K User's documentation
 TT20K Equipment Case
 Calibration Certificate
 TT20K Configuration and Monitor PC software