User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 31
Command Description
byte0
cmd
code
byte1
byte2
byte3
chksum
Receiver Input Source control
byte 1 - Input source
value (0 to 7)
0 - transmitter
(default)
1 - forced output value
= +1/4FS
2 - forced output value
= +1/2FS
3 - forced output value
= +FS
4 - forced output value
= 0
5 - forced output value
= -1/4FS
6 - forced output value
= -1/2FS
7 - forced output value
= -FS
0x65
0x00
chksum