User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 29
Command Description
byte0
cmd
code
byte1
byte2
byte3
chksum
Expansion board configuration
byte 1 - Expansion board
parameter index
byte 2 - Expansion board
parameter value
byte 1 - Index [0] is always the
Expansion board type with a
byte 2 value:
0xff = no expansion
board
0x80 = analog output
Valid index values are 0
through 7. Writing a value for
index 0 with bit 7 of byte 2 set
triggers updating the
expansion board configuration.
Always write to all other
necessary indexes before
triggering an update of
expansion board configuration.
See tables of expansion board
specific parameters for index
values and corresponding byte
2 parameters.
0x50
chksum