User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 26
byte
index
byte variable, all
variables start with
USBmsg2host.name.
Description
hdr.len
- 3
TXstat.Shunt
b0 is shunt1 status
b1 is shunt2 status
0 = Off, 1 = On
b7:b2 - unused
hdr.len
- 2
TXstat.RFpwr
b3:b0 = Transmitter RF
TX power level setting
b7:b4 - unused
hdr.len
- 1
TXstat.Misc
b0 – bad/unknown command
or parameter received
b1 – CalErr, error
during auto calibration
process
b2 – CalDflt, non-
volatile memory error,
using default
calibration values
b3 – CfgDflt, non-
volatile memory error,
using default
configuration parameters
b7:b4 – unused
hdr.len
TXstat.SPS
b3:b0 – sample rate code
1 = 50 samples/sec
4 = 500 samples/sec
7 = 5000 samples/sec
b7:b4 – low nibble of
Streaming minutes
remaining value
hdr.len
+ 1
TXstat.Stream
High 8 bits of Streaming
minutes remaining value.