User's Guide

This document is subject to change without prior notification.
Binsfeld Engineering Inc. | 231-334-4383 www.binsfeld.com 869610-9_A2 Pg. 21
byte
index
byte variable, all
variables start with
USBmsg2host.name.
Description
2
hdr.RXstat (LB)
low byte of the RX20K
status word
b0 - NoTxData, no
data rcvd from TX
b1 - TxDataErr, error
in data rcvd from TX
b2 - CmdAck, valid
cmd rcvd from USB
host
b3 - CmdNak, invalid
cmd rcvd from USB
host
b4 - EcomErr, frame,
parity, or checksum
error in data
received from the USB
host
b5 – Speed input
disabled (sensor pwr
is off)
b6 – not used
b7 - MultXmit, set
for multiple
transmitter
operation; separate
transmitters for each
RF channel (separate
xmit params for each)
3
hdr.RXstat (HB)
high byte of the RX20K
status word
b8 – WakeInPrg, Wake-
up sequence in
progress
b14:b9 not used
b15 – TestMode, RX20
is in test mode
operation