User Manual

Timing setting
Set the device time & the Video file time first before use.
Method 1：
1). Connect the device to computer though original data
cable
.(*Pay attention to backing up important files on
computer first!)
2). Find <TIME UPDATER.exe>, then double-click the left
button to open it, as shown in the figure, then click Exit.
3). Will keep walking according to modified time until
power off.
Notes:
1. The time needs to be reset after the device has
no electricity. 2. This time setting Method only support
windows computer, not support Mac or any phone!
1. Please copy the recorded file to the local folder of your
phone to play, because the video file is too big that the device
can’t drive it smoothly, that may cause the playback stuck!
2. Only support IOS 13 & over(only support iPhone 8 & over)