Technical data

BD / ED / FD 01/2006 page 33/49
9.5 Water protected internal socket (option BD)
The internal socket is splash proof.
IP system of protection 65 230 V 1N ~ 50-60 Hz
Charge max. 500 W
Maximum permitted operating temperature with this option: 50°C.
WARNING
Exceeding of the permitted maximum temperature.
Electrical hazard.
Danger of life.
Damage of the internal socket.
 Set the mechanical thermostat class 3.1 to 50°C.
∅ Do NOT exceed the temperature set-point of 50°C.
Heat emission of electrical devices connected inside the chamber may modify the
temperature range.
CAUTION
Risk of short circuit.
Damage of the unit.
 Use delivered plug only (IP protection type 66). Plug-in the plug and turn it to secure.
 If the socket is not used, close the lift-up lid and turn it for securing.
10. Maintenance, cleaning, and service
10.1 Maintenance intervals, service
DANGER
Electrical hazard.
Danger of life.
 Put off-circuit the unit before conducting maintenance work. Pull the power plug.
∅ The unit must NOT become wet during operation or maintenance works.
 Have all maintenance work conducted by professional electricians or experts
authorized by BINDER.
Have conducted regular maintenance work at least once a year.
Change the door gasket in cold condition only. Otherwise the door gasket will be damaged.