Manualshelf

Technical data

ManualsBrandsBinder ManualsKitchen AppliancesAPT.line FED
11121314151617181920
BD / ED / FD 01/2006 page 20/49
5. Installation of the equipment
5.1 Electrical connection
• BD all volumes, ED up to volume 240, FD all volumes:
Shockproof plug, mains voltage 230 V (1N~) +/- 10 %, 50/60 Hz
Fixed mains connection cable of 1800 mm in length
• ED 400, ED 720:
CEE plug 5 poles, mains voltage 400 V (3N~) +/- 10 %, 50/60 Hz
Fixed mains connection cable of 2700 mm in length
• BD 53-UL all volumes, ED 23-UL, FD 23-UL:
NEMA plug 5-15P, mains voltage 115 V (1N~) +/- 10 %, 60 Hz
Fixed mains connection cable of 1800 mm in length
• ED 53-UL, ED 115-UL, FD 53-UL, FD 115-UL:
NEMA plug 5-20P, mains voltage 115 V (1N~) +/- 10 %, 60 Hz
Fixed mains connection cable of 1800 mm in length
• ED 240-UL, ED 400-UL, ED 720-UL, FD 240-UL:
NEMA plug L21-20P, mains voltage 208 V (3N~) +/- 10 %, 60 Hz
Fixed mains connection cable of 2700 mm in length
• Prior to connection and start-up, check the mains voltage. Compare the values to the data specified
on the type plate of the unit (unit front behind the door bottom left-hand, or at the unit side, chap. 1.4).
• When connecting, please observe the regulations specified by the local electricity supply company
and as well as the VDE directives (for Germany)
• Pollution degree (acc. to IEC 1010-1): 2
• Over-voltage category (acc. to IEC 1010-1): II
CAUTION
Danger of incorrect mains voltage.
Damage of the equipment.
Check the mains voltage before connection and start-up.
Compare the mains voltage to the data indicated on the type plate.
See also electrical data (chap. 12.4 to 12.6).
5.2 Connection to a suction plant (optional)
When directly connecting a suction plant the spatial temperature exactitude, the heating-up and the
recovering times and the maximum temperature will be negatively influenced. So no suction plant should
be directly connected to the outgoing air pipe.
Active suction from the oven must only be effected together with extraneous air. Perforate the
connecting piece to the suction device or place an exhaust funnel at some distance to the
outgoing air pipe.