Technical data

BD / ED / FD 01/2006 page 18/49
4. Scope of delivery, transportation, storage, and installation
4.1 Unpacking, and checking equipment and scope of delivery
After having unpacked, please check the unit and its optional accessories, if any, based on the delivery
note for completeness and for transportation damage. If transportation damage has occurred,
immediately inform the carrier.
Please remove any transportation protection devices and adhesives in / on the unit and at the doors and
take out the operating manuals and accessory equipment.
CAUTION
Sliding or tilting of the unit.
Damage of the unit.
∅ Do NOT lift or transport the unit using either the door handle or the door.
∅ Do NOT lift units size 400 and 720 by hand
 Lift unit size 23, 53, 115 near the 4 unit feet from the pallet by aid of 2 persons, unit
size 240 by aid of 4 persons.
 Lift units size 400 and 720 using technical devices (fork lifter) from the pallet. Set the
fork lifter only from the rear in the middle of the unit. Make sure to place all the lateral
supports of the unit on the forks.
If necessary to send back the unit, please use the original packing and respect the advice for safe lifting
and transportation (chap. 4.2).
For disposal of the transport packing, see chap. 11.1.
4.2 Advice for safe lifting and transportation
The front castors of units size 720 can be blocked by brakes. Respect the advice for temporal
decommissioning (chap. 11.2).
CAUTION
Sliding or tilting of the unit.
Damage of the unit.
 Transport the unit only in its original packaging.
 Secure the unit with transport straps for transport.
∅ Do NOT lift or transport the unit using either the door handle or the door.
∅ Do NOT lift units size 400 and 720 by hand.
 Lift unit size 23, 53, 115 near the 4 unit feet from the pallet by aid of 2 persons, unit
size 240 by aid of 4 persons, and place it on a transport pallet with wheels. Push the
pallet to the desired site and then lift the unit near the 4 unit feet from the pallet.
 Place units size 400 and 720 using technical devices (fork lifter) on the transport
pallet. Set the fork lifter only from the rear in the middle of the unit. Make sure to place
all the lateral supports of the unit on the forks.
 Transport units size 400 and 720 ONLY with the original transport pallet. Set the fork
lifter only to the pallet. Without the pallet the unit is in imminent danger of overturning!!
• Permissible ambient temperature range: -10°C to +60°C.
You can order transport packing and pallets for transport purpose at the BINDER Service.