Technical data

BD / ED / FD 01/2006 page 15/49
1.6 Intended use
1.6.1 Incubators BD
The incubators BD are designed for exact temperation of harmless materials. Because of their precise
temperature accuracy these devices are especially useful for incubation of cultures at a standard
temperature of 37°C. Any solvent content must not be explosive or flammable. A mixture of any
component of the charging material with air must NOT be explosive. The operating temperature must lie
below the flash point or below the sublimation point of the charging material.
Other applications are not approved.
Do NOT use the unit for drying purpose, especially if greater quantities of steam leading to condensation
will be set free.
Respecting the instructions in this operating manual and conducting regular maintenance
work (chap. 10) is part of the intended use.
1.6.2 Heating/drying ovens ED and FD
The heating/drying ovens ED and FD are suitable for drying and heat treatment of solid or pulverized
charging material, as well as bulk material, using the supply of heat. The solvent content must not be
explosive or flammable. A mixture of any component of the charging material with air must NOT be
explosive. The operating temperature must lie below the flash point or below the sublimation point of the
charging material.
Other applications are not approved.
Do NOT use the unit for drying purpose, especially if greater quantities of steam leading to condensation
will be set free.
Due to the special demands of the Medical Device Directive (MDD) this ovens are not qualified for
sterilization of medical devices as defined by the directive 93/42/EWG.
Respecting the instructions in this operating manual and conducting regular maintenance
work (chap. 10) is part of the intended use.
2. Warranty
BINDER products are manufactured with great care and checked carefully prior to delivery (VDE-piece
checked).
1. Should your BINDER product have a material defect or manufacturing fault, we shall repair it – as
long as it is a new BINDER product – free of charge if the defect or fault occurs within 12 months
after delivery. This period will be extended to 24 months, starting from delivery, provided that all
maintenance and potential repair work within the first 12 months is carried out by us or authorized
service stations.
2. Should you discover a defect or fault in your BINDER product within the aforementioned period,
please inform the company from which you purchased the BINDER product or BINDER directly.
3. All above-mentioned periods or deadlines shall begin with the delivery of a new BINDER product to
the end buyer. Producing the invoice or delivery note shall bring evidence of deadline keeping.
4. In case a BINDER product has a defect or fault, we shall either replace the defective product with a
new one or repair the defective product at our discretion (so called supplementary performance –
“Nacherfüllung”). All parts replaced in the course of such repair shall become our property.
Deadlines mentioned under above number 1 shall not be prolonged by repair work or substitution. In
case supplementary performance should fail, usual warranty rights according to German Law
(withdrawal from contract or price reduction) shall apply, provided the defect or fault occurs within
the first 12 months. Should the 24 month-period be relevant and supplementary performance fail,
you shall only be entitled to a price reduction.