Installation & Assembly

CONTACT DETAILS

Tee-Zed acknowledges that its customers may be entitled to

statutory consumer guarantees and does not seek to exclude

or limit them. These guarantees include that Tee-Zed’s

products are of acceptable quality. This Tee-Zed product is for

the specific purpose detailed in the instructions and

packaging and Tee-Zed considers use outside of that purpose

to be abnormal use. To the maximum extent permitted by

law, Tee-Zed does not accept any liability for damage:

• arising from abnormal use of the products;

• caused by installation or removal of the products other

than in accordance with the supplied installation and

removal instructions; or

• arising under the law of tort or contract.

MAINTENANCE & CARE

• Gate must be fitted according to instructions, to ensure it works correctly.

• Regularly check gate to ensure it is fitted properly and securely. Adjust as required.

• Regularly check tension knobs and rubber pads to make sure the gate is securely in place.

• Do not use the safety gate if any components are damaged or missing.

• To clean, wipe surface with a damp cloth or sponge using mild detergent and warm water.

Never clean with abrasive, ammonia based bleach based or spirit type cleaners.

• If the gate does not stay in position or does not swing closed properly, the gate may not be

installed properly.

Remove and re-install gate, make sure the gate is installed vertically.

• Indicator Lines must be correctly aligned. Keep 1mm (0.04in) gap.

• Any additional and replacement parts should be obtained from Tee-Zed Products.

Made in Dongguan, China.

Tee-Zed Products Pty Ltd,

PO Box 2022, Bondi Junction NSW 1355

Australia Tel: +61 (0)2 9386 4000

info@tee-zed.com.au

Tee-Zed Products (N.Z.) Ltd

PO Box 64013, Botany Town Centre, Auckland

New Zealand Tel: +64 (0)9 274 8788

info@tee-zed.co.nz

Tee-Zed Products Ltd

PO Box 29227, Dunfermline, KY12 2DN

United Kingdom Tel: +44 (0)844 800 9445

info@tee-zed.co.uk

Dreambaby

products by