Installation & Assembly

4
3. To Install, place the gate in the opening so that the bottom of the Gate Frame is completely
flat on the floor (3A), and it is perpendicular to the openings and the floor (3B & 3C).
For use on stairs (3E).
Then fasten the Mounting Cups to the wall with screws or double-sided adhesive tape (3D).
Note: Ensure that they are aligned vertically, so that the Mounting Cups at the top are
directly above the ones at the bottom.
3A
3C
3E
3B
Top view of gate
Side view of gate
If the gate is used at the
bottom of the stairs to prevent
the child from climbing up the
stairs, it must be placed on
the lowest stair.
If the gate is to be used at the top
of the stairs to prevent the child
from falling down the stairs, it
must not be placed on any stair
below the level of the top stair.
Bottom of stairs
Top of stairs
floor floorfloor
WARNING
3D
Never use without Mounting Cups.
G x 4J x 4 G x 4J x 4
Fasten Mounting Cups to the wall with
screws or double-sided adhesive tape.