User guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
WR3000N 300M Wireless N Router
- 74 -
4.12 Advanced Routing
Figure 4-56 The Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-56): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.
4.12.1 Static Routing List
Choose menu “Advanced Routing → Static Routing List”, and you can configure the static
route in the next screen, shown in Figure 4-57. A static route is a pre-determined path that
network information must travel to reach a specific host or network.
Figure 4-57 Static Routing
To add static routing entries, follow the steps below.
1. Click Add New… shown in Figure 4-57, you will see the following screen Figure 4-58.
Figure 4-58 Add or Modify a Static Route Entry
2. Enter the following data.