User guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
WR3000N 300M Wireless N Router
- 38 -
Figure 4-15 Wireless Settings
¾ Wireless Network Name - Enter a value of up to 32 characters. The same name of wireless
network must be assigned to all wireless devices in your network. Considering your wireless
network security, the default Wireless Network Name is set to be Binatone_XXXXXX
(XXXXXX indicates the last unique six numbers of each Router’s MAC address). This value
is case-sensitive. For example, TEST is NOT the same as test.
¾ Region - Select your region from the drop-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog