Operation Manual

9.5.4.1 Playback the OGM

9.5.4 Playback and Delete the Outgoing Message

You can listen to your own personal OGM or the pre-set OGM for

ANS & REC mode or ANSONLY mode, or delete your personal OGM or

record a new one at any time. Note: the pre-set OGM cannot be deleted.

9.5.5 Set the Answer Delay

You can set the number of rings before the answering machine answers and

starts playing your OGM from two to eight rings or time saver (TS).

If time saver (TS) is set, the answering machine will answer after 6 rings if no

new messages are recorded, or after 2 rings if there is a new message, so if

you call in for remote access and it doesn't answer within 4 or 5 rings, you

can hang up and save on call charges.

Note: If your network voice messaging service (e.g. BT 1571) is enabled,

you will need to set the answer delay on your BB3825 to less than 6 rings,

otherwise the network service will answer and record incoming calls, and

prevent the BB3825 from recording them.

1. Press <MENU/OK> and <UP/DOWN> to select TAM.

2. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select ANS DLAY.

1. Press <MENU/OK> and <UP/DOWN> to select TAM.

2. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select OGM SET.

4. Press <MENU/OK> and <UP/DOWN> to select ANS&REC or ANSONLY .

5. Press <MENU/OK> to show PLAYBACK .

6. Press <MENU/OK> to play your current OGM and “PLAYING” is

displayed on the screen.

7. Press <MENU/OK> to stop the OGM playback or let it finish playing and

return to the previous menu.

Note: If a personal OGM is not recorded, the pre-set OGM will play.

9.5.4.2 Delete a Personal OGM

1. Repeat Steps 1 to 6 in Section 9.5.4.1

2. Press <C/MUTE> while the OGM is playing to delete your personal

Note: If a pre-set OGM is playing, you cannot delete it, so pressing

OGM and restore the pre-set OGM automatically.

<C/MUTE>will just stop the playback and return to the previous menu.

4. Press <MENU/OK> and <UP/DOWN> to select from 2 RINGS, 4 RINGS,

6 RINGS, 8 RINGS or TS. (The current set option is indicated by

a "*".)

5. Press <MENU/OK> to confirm.