Operation Manual

7.7 Ringer Setup

7.7.1 Change Ringer Melody

There are 10 base ringer melodies from 1 to 10, and you can set a different

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS

2. Press <MENU/OK> to show RING SETUP.

3. Press <MENU/OK>and <UP/DOWN> to select EXT RING or INT RING

4. Press <MENU/OK> and the display will show MELODY. Then press

<MENU/OK> to show MELODY 1

5. Press <UP/DOWN> to scroll through the Melody list (from 1 to 10).

6. Press <MENU/OK> to confirm the setting.

Note: The respective ringer melody will be played during your selection.

7.7.2 Change Ringer Volume

You can adjust the volume level of the ringer for internal calls (INT RING)

1. Follow steps from 1 to 3 in section 7.7.1.

2. Press <MENU/OK> <UP/DOWN> to select VOLUME. Then press

<MENU/OK> and <UP/DOWN> to step through the volume level list Off,

3. Press <MENU/OK> to confirm the setting.

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected, the <Ringer Off> icon will display.

1 to 5.

and external calls (EXT RING) separately, with settings from 1 (the quietest)

to 5 (loudest), or turn it OFF.

ringer melody for internal and external calls.

7.8 Set the Dial Mode

In Idle:

1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.

3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE.

4. Press <MENU/OK> to confirm.

You should normally leave the dialling mode at its default setting of TONE

(also called DTMF) unless the phone is connected to an old exchange that

only recognises PULSE dialling.