Operation Manual

Using the corded base:

7.5 Set Date and Time

The format for the date is YYYY-MM-DD, and the time is HH:MM in either

12-hour or 24-hour format.

1. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

Press <MENU/OK> to show TIME FORMAT. Select this if you want to

3. Press <MENU/OK> and the 4-digit year is displayed with the last two

4. Press <UP/DOWN> to set the year.

5. Press <MENU/OK> and the month field will flash.

6. Press <UP/DOWN> to set the month.

7. Press <MENU/OK> and the date field will flash.

8. Press <UP/DOWN> to set the date.

9. Press <MENU/OK> and the hour field will flash.

10. Press <UP/DOWN> to set the hour in the time format set.

11. Press <MENU/OK> and the minutes field will flash.

12. Press <UP/DOWN> to set the minutes.

13. Press <MENU/OK> to confirm and you will hear a beep and the display

will return to the idle screen.

digits of the year flashing.

change between 12-hour and 24-hour formats. Otherwise, press

<UP/DOWN> to show SET CLOCK.

Press <UP/DOWN> to step through the list of registered handsets and

Press <MENU/OK> and the selected handset will be de-registered.

Note: Press <C/MUTE> to return to the previous menu at any time.

select the one you want to de-register.

7.6 De-register a Handset

This operation should only be necessary if one of your handsets becomes

1. Press <MENU> and <UP/DOWN> to select SETTINGS.

2. Press <OK> and <UP/DOWN> to select DELETE HS.

Press <OK> and the display will show “PIN?”, enter a 4-digit PIN code

(default setting is 0000).

4. Press <MENU/OK> and the first registered handset number is shown.

faulty or lost and needs to be replaced.

You will need to enter the 4-digit system PIN in order to de-register a

handset from the base station. (The default PIN is 0000.)

A de-registered handset will have the antenna icon flashing and REGISTER

on the display.