Operation Manual

12
3.2 Display Icons and Symbols
Steady on when the handset is within range of the base.
Flashes when the handset is out of range of the base or
cannot communicate with the base.
Steady on when a call is in progress.
Flashes when there is an incoming call.
On when the speakerphone is turned on.
Steady on when an intercom call is in progress.
Flashes during intercom ringing.
Steady on when the telephone answering machine (TAM)
is turned on. Flashes when a new TAM message is
On when a new TAM message is playing or a new call is
viewed in the Call Log.
The screen display gives you information on the current status of the
On when the handset ringer is switched off.
Steady on when an alarm is set.
Flashes when the alarm time has been reached.
On when the keypad is locked.
Full battery power level.
2/3 battery power level.
1/3 battery power level.
Flashes when low battery power level is detected, needs
Cycles when the battery is charging.
Indicates when there are more characters or numbers after
Indicates when there are more characters or numbers in
On when you have a new Voice Mail message. (This is a
caller display service and is not usually available from UK
those being displayed.
telephone.
front of those being displayed.
charging.
network providers.)
recorded.