User guide
25
DECT Settings / Using the Phone Functions
4 Release the Paging/Register button.
5 Unplug the micro-USB plug of the power adapter from the base for a few
seconds, and then plug it back in again.
6 The notication bar on any previously registered handsets should show NA
instead of the handset number, indicating successful de-registration from the
base.
10.3 Reset the Handset
From the Home screen, Tap > DECT manager > Handset Reset > OK.
• The Handset Reset starts.
• If successful, “"Handset resetting done!" is displayed.
10.4 Local Area Code
1. From the Home screen, Tap > DECT manager > Local Area Code.
2. Press again the Local Area Code then key in the local area code number and
press OK to conrm.
3. After receiving local phone call, select the corresponding local call phone number
from the call log menu.
4. Press to show the lists of options for making call by this local phone number.
10.5 Voicemail settings
1. From the Home screen, Tap > DECT manager > Voicemail settings.
2. Press again the Voicemail number then key in the voicemail number and press
OK to conrm
11 USING THE PHONE FUNCTIONS
11.1 Make an External Call
Placing an external call using the Smart 66 Android Smart Home Phone handset is
similar to dialling with a mobile phone.
1. From the Home screen tap to access the phone tab and dial pad.
2. Enter the phone number.
3. Tap to dial the number.
4. Tap to end the call.
Tip
If you enter a wrong number, Tap to delete the digits one by one.