User guide
24
DECT Settings / Using the Phone Functions
3 Keep on pressing and holding the Paging/Register button for 40 seconds.
4 Release the Paging/Register button.
5 Unplug the micro-USB plug of the power adapter from the base for a few
seconds, and then plug it back in again.
6 The notication bar on any previously registered handsets should show NA
instead of the handset number, indicating successful de-registration from the
base.
10.3 Reset the Handset
From the Home screen, Tap > DECT manager > Handset Reset > OK.
• The Handset Reset starts.
• If successful, “"Handset resetting done!" is displayed.
11 USING THE PHONE FUNCTIONS
11.1 Make an External Call
Placing an external call using the Smart 64 Android Smart Home Phone handset is
similar to dialling with a mobile phone.
1. From the Home screen tap to access the phone tab and dial pad.
2. Enter the phone number.
3. Tap to dial the number.
4. Tap to end the call.
Tip
If you enter a wrong number, Tap to delete the digits one by one.
11.1.2 In-call Options
During a call, you can access the following options:
Dial pad Shows the dialer pad for Touch tone dial and Recall (R) function.
End Ends the current call.
Mute Mutes the handset microphone.
Speaker Switches between earpiece and speakerphone modes.