User guide

12
5.3 Registering Handset to Base
1. Press and hold the Register Button on the base for at least 5 seconds.
2. On the handset screen tap
> Settings > DECT manager > Handset
Registration > OK.
Note: Your Smart 64 Android Smart Home Phone Handset has been pre-registered
to the Base and should not need to be registered again. Handset registration is only
necessary when you buy extra handsets or if a handset has become faulty.
5.4 Charge the Handset Battery
When using your Smart 64 Android Smart Home Phone for the rst time, connect the
supplied power cord to the handset or stand the handset in a charger pod (if sup-
plied), and charge for at least 6 hours.
• Means the battery is still charging.
•
Means the battery is fully charged.
IMPORTANT
Only use the supplied 5V DC USB power adapter with the USB-to-Micro USB cable
to charge the handset directly or via a charger pod.
Setting Up