USER’S GUIDE MBP30 BABY MONITOR USER’S GUIDE The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP30. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 10 1 11 12 8 2 7 3 6 4 5 1. 2. 3. 4. 5. 6. 7. 8. Display Menu key ( ) Left / Vol - key Microphone Down key Right / Vol + key Up/Talk key Power/Channel*/Enter key 9 9. 10. 11. 12. 13. 13 Power adapter connector Belt clip Speaker Battery cover screw Battery cover *This function is only available for multi-pack version with more than one camera.
Overview of your Baby unit 1 5 7 6 2 4 3 1. 2. 3. 4. 5. Power LED Infrared LEDs Light sensor Microphone Camera lens 6. On/Off switch 7. Speaker Important guidelines for installing your Baby Monitor • • • • • To use your video monitor baby and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
1. 2. 3. Safety Instructions ..................................................................... 6 Getting started ............................................................................ 7 2.1 2.2 2.3 2.4 Baby unit power supply ..............................................................7 Parent unit battery Installation....................................................8 Parent unit power supply............................................................9 Registration ........................
1. Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This baby monitor is not a substitute for responsible adult supervision.
2.1 ENGLISH 2. Getting started Baby unit power supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket (230V/50Hz). NOTE Only use the enclosed power adapter (5V DC / 500mA). 2. Slide the power switch to the ON position. The power LED will light up in green. 3. To switch off the baby unit, slide the power switch to OFF position.
2.2 Parent unit battery Installation screw Red Black 1. 2. Turn the belt clip so that it is in the hanging position. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 3. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. 4. Close the battery compartment and tighten the screw in a clockwise direction. to turn ON the parent unit. The LCD screen illuminates. 5.
Parent unit power supply ENGLISH 2.3 IMPORTANT We recommend the rechargeable battery pack to be installed before use, so that the unit continues to work in the event of a mains power failure. 1. Connect the small plug of the power adapter to the parent unit and the other end to the mains socket (230V/50Hz) NOTE Only use the enclosed power adapter (5V DC / 1000mA). 2. The LCD screen illuminates and starts up automatically after a few seconds. to turn OFF the parent unit. 3.
2.4 Registration The baby monitor is already pre-registered upon your purchase. You do not need to register it again unless the baby unit loses its link with the parent unit. Up to 4 baby units can be registered to one parent unit. If you have more than one baby unit, please check that you have selected the correct channel at the Parent unit for that baby unit before you attempt to register it again. To re-register your baby unit, or register a new baby unit, follow the procedure below: 1.
3.1 ENGLISH 3. Using the Baby Monitor MBP30 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit until you are satisfied with the image in the parent unit. • To wall mount your baby unit, see section “9. Wall mounting instructions” for more details.
3.2 Selecting camera channel (for multi-pack only) The Parent unit has 4 camera channels ( 1/ 2/ 3/ 4) for which the video can be displayed and the audio heard. Each baby unit is paired with a camera number 1, 2, 3 or 4 when it is registered to the parent unit, and the parent unit shows the number of the selected channel at the top right of the display. You will need additional baby units registered to the parent unit if you wish to monitor different areas using this channel option. .
4.1 ENGLISH 4. MBP30 Parent Unit Menu Options Brightness This option lets you change the brightness of the LCD. 1. Press to enter menu mode. or until is selected on the LCD screen. 2. Press 3. Press or to adjust the LCD brightness level. The LCD brightness will be adjusted accordingly. ( ) + - 4.2 Night Vision When activated, this function automatically switches the camera to night vision when the brightness level of the room where the camera is placed is not strong enough. 1.
4.3 Voice Activation The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that minor disturbances can be detected and transmitted to the parent unit. 1. Press to enter menu mode. 2. Press or until is selected on the LCD screen. or to adjust the VOX level. When the level is on the 3.
At the end of the product lifecycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units’ electrical power, then plug them back in. • Is the unit turned on? on the parent unit to turn it on. Press and release • Is the correct camera channel number selected? Change the camera channel number, if necessary. F Registration If the baby unit has lost its link with the parent unit • Try recharging or replacing the battery pack.
ENGLISH 8. General Information If your product is not working properly.... 1. Read this User’s Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at: +44(0) 845 218 0890 in the UK +65(0) 68412668 in Singapore To order a replacement battery pack, contact customer service or visit our website. Consumer Products and Accessories purchased in the United Kingdom and Singapore.
What will BINATONE ELECTRONICS INTERNATIONAL LTD. do? BINATONE ELECTRONICS INTERNATIONAL LTD., at its sole option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that does not conform to this warranty. Binatone Electronics International LTD.
Products or Accessories Covered Consumer Products Length of Coverage One (1) year from the date of purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of purchase by the first consumer purchaser of the accessory. Consumer Products and The balance of the original warranty or Accessories that are for ninety (90) days from the date returned Repaired or Replaced to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Abuse & Misuse. Defects or damage that result from: (a) improper or unreasonable use, operation, storage, misuse or abuse, accident or neglect or other external cause, such as physical damage (cracks, scratches, etc.
To obtain service or information, please call: +44(0) 845 218 0890 in the UK +65(0) 68412668 in Singapore You will receive instructions on how to ship the Products or Accessories, the shipment of which shall be at your own risk and expense, to a BINATONE ELECTRONICS INTERNATIONAL LTD. Authorised Repair Centre.
Technical Specifications Baby unit Frequency 2.4GHz to 2.4835GHz Maximum range Extended range up to 450 feet* *Based on unobstructed line of sight. Actual range will vary depending on surroundings. Image sensor Colour CMOS Lens f 2.5mm, F 2.8 IR LED 9 pcs Power DC 5V, 500mA (Model: Kings, KSS05-050-0500B) Parent unit Frequency 2.4GHz to 2.4835GHz Display 2.4" TFT LCD Display colours 16.
1. ENGLISH 9. Wall mounting instructions Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws (not supplied). 4mm 8mm headscrew head screw 60.00mm (Tolerence 1.0mm) 4mm 9.
Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your baby unit with the screws and push it down. 3. Point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit. Wall mounting instructions 25 ENGLISH 2.
Motorola
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2009. All rights reserved. Version 1.
