User`s guide

Using the menus
35
3.5.3.3 Using Framechannel
™
NOTE
Use the supplied remote control for this operation.
1. Press the button to go to Framechannel. The
screen will display web photos that you have uploaded
on your Framechannel account.
z To play photos in full screen single photo mode,
press the
button.
z To start running slideshow, press the
button again.
2. To quit, press the EXIT button.
NOTE
• To copy a photo, select the photo in thumbnail mode
and press the MENU button on the remote control.
When the Copy One option appears, press the
button to select YES, use the UP/VOL＋ or
DOWN/VOL－ button to select the destination (Internal
Memory, USB or Memory Card), and then press the
button to proceed.
• If the photos displayed are not the photos of your own,
check your Framechannel
™
account configuration in
Account Cfg. You might have input the wrong account
name and 4-digit PIN code. Please verify your account
name/PIN code and try again.
3.5.3.3.1 Framechannel custom settings
By default, Framechannel only displays 5 photos from each
channel. To increase the number of photos to be displayed
on this photo frame, follow the steps below:
1. Log into www.framechannel.com
2. Go to My Account.
3. Click Edit Channel Rules.
4. In My channels, choose a channel to modify and click
on the Rules link.
5. Type in a value you prefer in the Maximum number of
photos field.
6. Click Save.
The new settings will take effect the next time you access
Framechannel on this photo frame.