Operation Manual

iDECT Help Line (for UK only): 0845 345 9677 (Local Call rate) 25
6
@
Use the keypad to enter the 4-digit PIN code (default PIN code is 0000).
7
m
Press MENU/OK m to confirm.
Î The display shows Registering... .
8
p
Press and hold FIND p on the base until the base starts beeping.
After a short while you will hear a confirmation tone on the handset.
Î The display shows the handset numbers available for registration.
9
@
Enter the handset number to you want, or after 7 seconds it will
automatically select the first available one.
Î This number is displayed on the handset during standby mode.
You may need to use it for intercom calls.
Unregister a handset
You may need to do this in order to replace a faulty handset.
1
m
Press MENU/OK m to enter the main menu.
2
.
Press UP u or DOWN d to select Advanced Set .
3
m
Press MENU/OK m to confirm.
4
.
Press UP u or DOWN d to select Unregister .
5
m
Press MENU/OK m to confirm.
Î The display shows Enter PIN_ _ _ _ .
6
@
Use the keypad to enter the 4-digit PIN code (default PIN code is 0000).
7
m
Press MENU/OK m to confirm.
Î The display shows the handset numbers available for de-registration.
8
@
Enter the handset number to unregister.
9
You will hear a confirmation tone if the de-registration is successful,
and the de-registered handset will show
Unregistered .
Warning: You can de-register the handset you are using.
Modify the PIN code
You need to enter a 4-digit master PIN code if you wish to change the
settings of some functions. The default PIN code is 0000. This function
allows you to change the PIN code to your own preferred number.
1
m
Press MENU/OK m to enter the main menu.
iDect_X5i_IFU_EN_UK.book Page 25 Monday, November 30, 2009 11:49 AM